HONEYSEW 6 in 1 All in One Tool for Patchwork and Quilting Brings Together Most Used Tools Stylus,Scant 1/4" |Ruler Work Gauge and Seam Guide Etc

HONEYSEW All In One Tool Brings 6 of Your Favourite Tools One Easy to Use. Stylus,Both Pointed and Flat Edged Scant 1/4" Ruler Work Gauge Scant 1/4" Seam Gauge Machine Needle Replacement Tool Needle Centring Guide Locating Pin Guide

• Stylus:The stylus has a pointed and flat side and is invaluable for controlling fabric when piecing.It can also be used to sweep under the foot to bring up the threads.It can also be used to push out points.
• Locating Pin Guide:Often we can't or don't want to use a pin from underneath ouy quilt when ruler quilting.This is when I use Cloth Table to hold the pin onTop of my work.These Tiny Crosshair lines are designed to help you achieve accurate placement of your Locating Pin when using Rotating Template that need a locating pin.Cut a square of tape,then put the pin in from underneath in the middle.It doesn't have to be exact.Put the locating pin guide on top of this,there is a tiny hole in the middle.Align these lines with the reference lines on the block.Press the tape down to th block.The pin is now securely attached to your block.
• Machine Needle Inserter Hole:This hole allows you to remove and replace your machine needles easily,Place you needle,point down,in this hole.Holding the All in One Tool,place the needle in positing,tighten the needle screw Remove the All in One Tool.it can be used left or right handed.
• Needle Centring Guide:The Needle Centring Guide was designed to ensure that you needle is centred in your ruler foot.With so many machines and feet on the market.I have noticed that the needle is not always exactly in the centre of the ruler foot. The guide is exactly 1/2" across gently lower the ruler foot into position on the guide,adjust your needle position so that it will go into the hole.It is also a quick guide to make sure that your needle position hasn't moved during stitching.
• Scant 1/4" Seam Gauge:The scant 1/4" seam hauge is a most have for accurate patchwork piecing.Align the flat side of the toolagainst the edge of your regular foot and adjust the needle position until it goes into the slot.Sew a sample seam and check that your seam allowance is accruate. 1/4" Ruler Work Gauge:A 1/4" is most frequently used measurement we use for ruler work.I use it all the time,so that is why it is on this new tool.I also use this end to sweep under my foot to bring my threads.